Titanium Equipment's

Engineering & Electrochemical Equipment's Manufacture

TITANIUM HEADERS – TOP CHANNEL & BOTTOM CHANNEL

These Headers are fitted in Titanium Chlorine Cooler Shell& Tube type Heat Exchangers for Caustic and Chlorine Industries. Shell and tube heat exchangers are considered one among the most effective type of heat exchangers. These heat exchangers have a cylindrical shell with a bundle of tubes. The tubes are made from thermally conductive materials, which allow heat exchange between the hot fluids flowing outside the tubes and the coolant flowing through the tubes. These heat exchangers offer an optimal cooling solution to different applications including:

Ä  Hydraulic

Ä  Leisure

Ä  Marine

Ä  Rail

Ä  Industrial

 

Shell and tube heat exchangers are widely used in applications, which require cooling or heating a large volume of process fluids or gases. There are a number of different types of shell and tube heat exchanger designs to meet several process needs in every industry.

Important Parts of Shell and Tube Heat Exchangers

The following are the four most crucial parts of a shell and tube heat exchanger:

Ü  Tube BundleA tube bundle consists of tube sheet sand tubes. The tube bundle is held together by baffles, and tie rods.

Ü  ShellThe tube bundle is included in a shell.

Ü  Front HeaderA front header, which is also referred to as a stationary header, is the part from where the fluid enters the tube side of the exchanger.

Ü  Rear HeaderA rear header is a part from where the tube side fluid leaves the exchanger or where it is returned to the front header.

Solid titanium headers – top channel & bottom channelare made from Titanium, Tantalum, Nickel, and Zirconium are our main focus. Ti Anode Fabricators Pvt Ltd has an internationally recognized reputation for the design and manufacture of Solid titanium headers – top channel & bottom channel. We are one of the trustworthy manufacturers, exporters, dealers, and suppliers of titanium headers. Recently we have supplied titanium headers to one of our valuable customers and the product photo is attached below.

TITANIUM HEADERS – TOP CHANNEL & BOTTOM CHANNEL

Shell and tube heat exchanger is used in various industrial process applications because they can perform tasks such as:

v  Removal of process heat and feed water preheating

v  Cooling of hydraulic and lube oil

v  Cooling of turbine, compressor, and engine

v  Condensing process vapour or steam

v  Evaporating process liquid or steam

Following are some key application areas, where shell and tube heat exchangers are used:

ü  Power Generation

ü  HVAC

ü  Marine Applications

ü  Pulp and Paper

ü  Refrigeration

ü  Pharmaceuticals

ü  Air Processing and Compressor Cooling

ü  Metals and Mining

 

To know more details Please feel free to visit our website: - www.tianode.com 

Follow Us on Instagram , twitter, Facebook, Pinterest

SUPPLY OF EXOTIC METAL SHELL AND TUBE HEAT EXCHANGER USED FOR SODIUM HYPO CHLORITE PLANT TO JORDAN

 

SUPPLY OF EXOTIC METAL SHELL AND TUBE HEAT EXCHANGER USED FOR SODIUM HYPO CHLORITE PLANT TO JORDAN

Ti Anode Fabricators Pvt Ltd offer the Shell Tube Heat Exchangers out of Titanium, Ti-Pd, Tantalum, Niobium Zirconium, Nickel, Hast alloy B & C, Inconel, Monel & its Alloys.

 

Range

a) Shell Diameter                : upto 2 mtrs.

b) Tube Diameter                : upto 50.8 mm

c) Tube Sheet Details          : Thick : max 100mm

: Type : Solid / Claded Plate

d) Length                              : upto 8 mtrs.

e) 'U' Tubes                            : upto 8 mtrs.

Design Code

ASME & TEMA

Test

A.  Pressure

 

Shell Side : max. 50.0 Kg / cm2

Tube Side : max. 50.0 Kg / cm2

 

B.     Non Destructive Testing

 

Radiographic Test Unit (Gamma & X-Ray)

Ultrasonic Flaw Detector

Magnetic Particle Crack Detector

Liquid/Dye penetrant Test Facility

 

Inspection & Q.A

 

Lloyds

Humbherys & Glasgow

Devi Power Gas

Inspectorate India

IGCAR

 

Given below photographs shows the supplied equipment to client for your review.

 

Heat exchanger are made from Titanium, Tantalum, Nickel, Zirconium, Hast alloy are our main focus.

Please feel free to contact us equipmentsmktg@tiaano.com  /  rotarysupport@tiaano.com  

Will share our credentials (client list, performance certificate, etc.) based on email request.

Ti Anode Fabricators Pvt. Ltd.

No. 48, Noothanchary, Madambakkam,

Chennai - 600 126, I N D I A.

Email: rotarysupport@tiaano.com webpage: www.tiaano.com

SUPPLY OF EXOTIC METAL TUBES USED FOR HEATER INDUSTRIES TO MAHARASHTRA STATE

SUPPLY OF EXOTIC METAL FASTENERS USED FOR  HEATER APPLICATION  TO MAHARASHTRA STATE

Wide ranges of tubes are offered by Tiaano from highly corrosion-resistant special materials for the heaters industries, manufactured in-house from traceable metals, are precision made to the usual international standards. Our tubes are used to make the following products likes heaters, heating coil, cooling coils, and shell and tube heat exchangers, thermowell, thermowell sleeves etc.

Given mentioned photographs shows the supplied component to client and for your review.

  

Tubes are made from Titanium, Tantalum, Nickel, Zirconium, Hast alloy are our main focus.

 Please feel free to contact us equipmentsmktg@tiaano.com  /  rotarysupport@tiaano.com  

Will share our credentials (client list, performance certificate, etc.) based on email request.

Ti Anode Fabricators Pvt. Ltd.

No. 48, Noothanchary, Madambakkam,

Chennai - 600 126, I N D I A.

 

Email: rotarysupport@tiaano.com webpage: www.tiaano.com

SUPPLY OF EXOTIC METAL SHELL AND TUBE HEAT EXCHANGER USED FOR CAUSTIC SODA PLANT TO GUJARAT STATE

SUPPLY OF EXOTIC METAL SHELL AND TUBE HEAT EXCHANGER USED FOR CAUSTIC SODA PLANT TO GUJARAT STATE

Ti Anode Fabricators Pvt Ltd offer the Shell Tube Heat Exchangers out of Titanium, Ti-Pd, Tantalum, Niobium Zirconium, Nickel, Hast alloy B & C, Inconel, Monel & its Alloys.

Range

Range

a) Shell Diameter               : upto 2 mtrs.

 

b) Tube Diameter              : upto 50.8 mm

 

c) Tube Sheet Details     : Thick : max 100mm

                                        : Type : Solid / Claded Plate

d) Length                                  : upto 8 mtrs.

 

e) 'U' Tubes                              : upto 8 mtrs.

Design Code

ASME & TEMA

Test

A.    Pressure

                    Shell Side : max. 50.0 Kg / cm2

           Tube Side : max. 50.0 Kg / cm2

  B.     Non Destructive Testing

 

Radiographic Test Unit (Gamma & X-Ray)

Ultrasonic Flaw Detector

Magnetic Particle Crack Detector

Liquid/Dye penetrant Test Facility

 

Inspection & Q.A

Lloyds

Humbherys & Glasgow

Devi Power Gas

Inspectorate India

IGCAR

Given below photographs shows the supplied equipment to client for your review.

Heat Exchanger are made from Titanium, Tantalum, Nickel, Zirconium, Hast alloy are our main focus.

Please feel free to contact us equipmentsmktg@tiaano.com  /  rotarysupport@tiaano.com  

Will share our credentials (client list, performance certificate, etc.) based on email request.

Ti Anode Fabricators Pvt. Ltd.

No. 48, Noothanchary, Madambakkam,

Chennai - 600 126, I N D I A.

 Email: rotarysupport@tiaano.com webpage: www.tiaano.com