Titanium Equipment's

Engineering & Electrochemical Equipment's Manufacture

TITANIUM STRAINER

Ti Anode Fabricators Pvt Ltd has an internationally recognized reputation for the manufacture of the Titanium Strainer. Tiaano has emerged as one of the topmost Titanium Strainer Manufacturers.

Titanium Strainer mechanically removes the solid from a flowing liquid. It is highly used in high corrosion medium. It solves many corrosion problems that other metals can’t able to resolve.

 

Strainers are generally used where high flow capacity is required. Strainers are also available in a duplex style which consists of two parallel Strainers and diverting valves, which permit diversion of the flow through one of the Strainer elements while the other element is being serviced-an essential feature where the flow cannot be interrupted. Strainers do not necessarily remove only dirt. They take out material that is not wanted in the fluid and this can sometimes be a valuable product that may be saved. Strainers are designed for installation in horizontal lines. They are commonly used for liquid service applications.

Applications of Titanium Strainer:

Ø  Chlor-alkali industry

Ø  Soda industry

Ø  Pharmaceutical industry

Ø  Chemical industry

Ø  Fertilizer industry

When the filter is operating, the water to be filtered enters the strainer basket thru the inlet, flows through the filter panel, and enters the desired pipe through the process flow outlet. Particle/solid impurities present in the water are stuck inside the basket filter screen. With this continuous flow, more and more particles are caught, and the speed of filtering gets slower over time and the filter hole would get narrower and smaller, this results in a pressure differential between the inlet and the outlet. A pressure gauge installed before and after a strainer will indicate a pressure loss due to clogging. This can help in establishing a maintenance schedule for cleaning the strainer screen. Extra screens can useful in keeping the system operating during the cleaning process. As the gap between inlet and outlet pressure exceeds the fixed value, the differential pressure sensor transmits the electrical signal to the controller, and the control mechanism begins the drive motor to rotate the shaft via the transmitting element. At the same time, the blowing port is opened and discharge of debris takes place from the blowing port.

 

Titanium strainers are made from Titanium, Tantalum, Nickel, Zirconium, Hastelloy are our main focus. Recently we have supplied Titanium strainers to one of our valuable customer and the product photo is attached below.

 

Our sincere team of professionals and employees are always making an extensive effort to make high range of qualitative products which can be completely satisfy the expectations of our reliable consumers. We are proficiency in ethical to the equipment demands in diverse industries including Power, Oil & Gas, and Chemical, Water & Waste Water Treatment, Food, Pharma and others.

Enquiry

For any inquiry in regards to Titanium Strainer please contact us on +91 8438164458 or email us on aerospace@tiaano.com.

OC 634 - TITANIUM STRAINER

Comments are closed