Titanium Equipment's

Engineering & Electrochemical Equipment's Manufacture

TITANIUM GAS DISTRIBUTOR

Ti Anode Fabricators Pvt Ltd has an internationally recognized reputation for the manufacture of the Titanium Gas Distributor. Gas distributor at the bottom is used as a gas-liquid contacting device in the columns. The selection of a gas distributor requires characterization and quantification of the quality of the gas flow distribution.

Titanium Gas Distributor Advantages:

  1. Resistance to Corrosion
  2. High strength
  3. Non Toxic
  4. Low Thermal Expansion
  5. High melting point
  6. Excellent Fabrication Possibilities

In Titanium Gas Distributor there are 3 flanges. It prevents leakage when the liquid passes through this vessel.

Enquiry

For any inquiry in regards to Titanium Gas Distributor please contact us on +91 8438164458 or email us on equipmentsmktg@tiaano.com.

OC 110 - GAS DISTURUTOR

CAUSTIC SODA HEAD TANK - MOC S.S 310S CAUSTIC SODA HEAD TANK

Ti Anode Fabricators Pvt Ltd has an internationally recognized reputation for the manufacture of the Caustic Soda Head Tank (MOC S.S 310S). MOC 310S stainless steel type helps resistance to a wide range of concentration and temperature.

Many facilities use stainless steel tanks to store caustic soda. The steel walls are resistance to corrosion. In liquid form, caustic soda become “slippery” and tends to find weak points in storage containers, and fittings.

Caustic soda head tank, comprise: groove body, the top of above-mentioned groove body is provided with charging aperture, the sidewall of bottom is provided with discharging opening, it is characterized in that, be connected with discharge pipe on the above-mentioned discharging opening, above-mentioned discharge pipe is provided with control valve and flow meter, and above-mentioned control valve is connected by signal with the PLC controller; The bottom of above-mentioned groove body is infundibulate, and is provided with exhaust-valve in the lower end.

Tiaano supplied this MOC S.S 310S Caustic Soda Head Tank to M/S. BODAL CHEMICAL LTD, GUJARAT.

Enquiry

For any inquiry in regards to MOC S.S 310S Caustic Soda Head Tank please contact us on +91 8438164458 or email us on equipmentsmktg@tiaano.com.

 

OC 368 - CAUSTIC SOD HEAD TANK

TITANIUM ROD

Titanium rod can be used in aircraft engines and parts, chemical equipment parts (reactors, pipes, heat ex-changers and valves, etc.) ship hulls, bridges, medical implants, artificial bones, sporting products and consumer goods. Tiaano provide titanium rods and titanium alloy rods, according to your requirements.

Titanium Rod is a very popular go-to for many products and Chemical Process application. It is used where corrosion resistance is an important criterion. It lends itself to a multitude of products, from fasteners to jewelry also connecting rods. It provides a lighter weight material and higher strength.

Tiaano offer Titanium Rod as per ASTM Standard Specification in different Grades, different Diameter and Lengths.

Advantages of Titanium Low weight, Good current resistance, Long operating life, maintenance free, economical, high dimensional stability and load resistance, extremely low consumption rate, high chemical stability, high conductivity is provided which resulting in better current distribution entire length of the Rod.

Commercially Pure Titanium are:

Ø  Titanium Grade 1

Ø  Titanium Grade 2

Ø  Titanium Grade 4

Ø  Titanium Grade 5

Ø  Titanium Grade 7

Enquiry

For any inquiry in regards to Titanium Rod please contact us on +91 8438164458 or email us on equipmentsmktg@tiaano.com.

OC 451 - TITANIUM ROD

TITANIUM END PLUG - END PLUG FASTERNERS

Ti Anode Fabricators Pvt Ltd has an internationally recognized reputation for the manufacture of the Titanium End Plug. Pipe end caps act as a fitting to close the ends of hydraulic or pneumatic pipes or tubes or can be applied to a vessel or a container assembled on the bottom. They are used to cut off the transition and to waterproof openings of pipes or containers in internally pressurized environment.

Wide ranges of End Plug are offered by Tiaano from highly corrosion-resistant special materials for the Connectors industries, manufactured in-house from traceable metals, are precision made to the usual international standards.

End Plug are made from Titanium, Tantalum, Nickel, Zirconium, Hast alloy are our main focus.

Please feel free to contact us equipmentsmktg@tiaano.com, Ph: +91 8438164458

OC 550 - TITANIUM END PLUG

TITANIUM PIPE SPOOL

Tiaano manufacture and supply various types of pipes and fittings for various industries. Pipe spools are the pre-build parts of a piping system. Pipes, Flanges, and fittings are called pipe spools and they are produced before they are used in piping system. Pipe spools are pre-shaped to make easier assemble using hoists, gauges and other tools for joining the parts. Installing pipe spool speeds up repairs and reduces downtime as a replacement section and quickly slotted into the system.

A pipe spool refers to a section of piping system that is prefabricated as smaller segments with flanges and fittings. Pipe spools are often prone to corrosion due to their exposure to the elements, water and other natural electrolytes.

We are the leading Manufacturer of Piping Spool which is utilized in Power plants, Refineries, Pharmaceutical Plants, Chemical Plants, and other Process Plant. 

Materials Used For Pipe Spool:

  • Titanium Pipe Spool
  • Nickel Pipe Spool
  • Duplex & Super Duplex Steel Pipe Spool
  • Carbon Steel Pipe Spool
  • Alloy Pipe Spool

 

Enquiry:

For any inquiry in regards to Titanium Pipe Spool please contact us on +91 8438164458 or email us on equipmentsmktg@tiaano.com.

 

TITANIUM HEADER PIPE

Ti Anode Fabricators Pvt Ltd has an internationally recognized reputation for the manufacture of the Titanium Header Pipe. Titanium Piping Systems have been found to be very cost-effective methods of resisting damaging corrosion in the process line. Salts, acids and other seriously corrosive chemicals are severely damaging to lesser materials than Titanium.

ADVANTAGES OF TITANIUM PIPE:

  • Ø  The economic service life is very high.
  • Ø  It has superior Corrosion Resistance
  • Ø  It delivers high heat transfer efficiency
  • Ø  It accommodate high steam pressure

Titanium Piping Systems suited for service applications:

  • Ø  Organics Acids
  • Ø  Sea Water
  • Ø  Sulfuric Acid
  • Ø  Inorganic Salt Solutions
  • Ø  Organic Chemicals
  • Ø  Oxygen
  • Ø  Hydrogen

Enquiry

For any inquiry in regards to Titanium Header Pipeplease contact us on +91 8438164458 or email us on equipmentsmktg@tiaano.com.

TIAANO INLET CONE FOR TUNNEL DRIER FAN

Tiaano manufacturing and supplying fan inlet cones which improves performance and reduce noise. These inlet cones are made up of SS-304, where SS-304 has high heat-resistant grade, and offers good corrosion resistance for many chemical corrosion, as well as industrial atmospheres. These inlet cones are used in various industries to circulate harmful chemicals out of the internal environment and to maintain consistent temperature.

Advantages:

·         Increased Efficiency

·         Enhanced Wellness

·         Safe Conditions

 

Enquiry

For any inquiry in regards to Titanium Gr.2 Centrifugal Pump with Motor Coils please contact us on +91 8438164458 or email us on equipmentsmktg@tiaano.com.

OC 675 - INLET PIPELINE

TANTALUM HEATING COIL

Ti Anode Fabricators Pvt Ltd has an internationally recognized reputation for the manufacture of the Tantalum Heating Coil. Electrical current flows through the heating element and generates heat. This type of resistance heater is responsible for creating high temperatures in the furnace.

Tiaano is well versed in manufacturing the Heating Coil in various metals Titanium, Tantalum, Niobium etc. Tantalum Heating elements are well known for their strength and stability in high heat application.

We are one of the trustworthy manufactures, exporters, dealers, and suppliers of HEATING COIL. The Heating Coil is used to overcome problems of heat transfer in aggressive environments. Heating coils manufactured by us are very efficient and play a vital role in heat transfer applications. It may be directly immersed in the medium to heat it up r radiate heat through an open space. We produce high-quality Heating Coil, manufactured in-house from traceable metals, which are in precision made to the usual international standards. Given mentioned photographs shows TAF’S efficiency and experience.

Recently we have supplied Heating Coil to one of our valuable customer and the product photo is attached below.

Characteristics of heating coil:

High melting point:- Heating Coil manufactured by us can easily withstand very high temperature and it might not melt down the coil or heating element with the increase in temperature.

High resistance:- It requires a small length of wires so that it can easily heat the appliances.

Mechanical Properties:- Heating Coil manufactured by us is very rigid in shape and does not deform when used at high temperatures. 

OC-578 - HEATING COIL

TITANIUM GR.7 HYDRO CYCLONE

Ti Anode Fabricators Pvt Ltd has an internationally recognized reputation for the manufacture of the Titanium Gr.7 Hydro Cyclone. The hydro cyclone is a representative device used to realize particle classification using centrifugal force.

Titanium Gr.7 Hydro Cyclone has an optimum separation characteristic at varying operation parameters. It has long life time as per appropriate selection of material for each application. The operating system is very simple. Titanium Gr.7 Hydro Cyclone woks fast and trouble free changing of wear-parts.

Applications:

ü  Minerals

ü  Ores

ü  Chemical Intermediates

ü  Alumina

ü  Sands

Hydrocyclone Product Range:

ü  Conical Hydro cyclone

ü  Flat Bottom Hydro cyclone

ü  TWIN Hydro cyclone

ü  Hydro cyclone with Grit box

ü  Carbon Steel Hydro cyclone

Enquiry

For any inquiry in regards to TITANIUM GR.7 HYDRO CYCLON please contact us on +91 8438164458 or email us on equipmentsmktg@tiaano.com.

 

OC 700 - HYDRO CYCLON

TITANIUM CENTRIFUGAL PUMP WITH MOTOR

Ti Anode Fabricators Pvt Ltd has an internationally recognized reputation for the manufacture of the Titanium Gr.2 Centrifugal Pump with Motor. Centrifugal Pumps are used to transport fluids by the conversion of rotational kinetic energy to the hydrodynamic energy of the fluid flow.

The fluid enters the pump impeller along or near to the rotating axis and is accelerated by the impeller, flowing radially outward into a diffuser or volute chamber, from which it exists.

Centrifugal Pumps are commonly uses in Water, Sewage, Petroleum and Petrochemical Pumping. Titanium Centrifugal Pumps are often chosen for their high flow rate capabilities.

Types and Applications of Centrifugal Pumps:

Type of centrifugal pump

Application

Chopper/grinder pump

Waste water in industrial, chemical and food processing/ sewage

Circulator pump

Heating, ventilation and air conditioning

Multistage pump

High pressure applications

Cryogenic pump

Liquid natural gas, coolants

 

Enquiry

For any inquiry in regards to Titanium Gr.2 Centrifugal Pump with Motor Coils please contact us on +91 8438164458 or email us on equipmentsmktg@tiaano.com.

OC 595 - CENTRIFUGAL PUMP