DESIGN:
TAF Thermowells / sleeves are designed to meet standards,
established by BSI, DIN, ASME, ISO 9001 and other authorities;
manufactured in-house from traceable exotic metals, are precision
made to the highest standards of finish in our modern well
equipped machine shop.
QUALITY:
 ASME
IX coded welding Gun
drill facility to ASTM A182 or BS 503 NACE
Heat treatment MR-01-75. Computerized
corrosion database. Full material traceable Variety
of thermowell is from "single roof" Hydrostatic
pressure test on bar stock thermowells up to 300kg/cm2. Pneumatic
test on sleeves up to 30kg/cm2. for 2 hours. Dyepenetrant
and Radiography test as and when required.
AVAILABILITY:
(a)
Bar Stock Thermowells:
-
Screwed construction - Flat tip well for low-pressure application.
-
Flange construction - Domed tip well for high-pressure application.
(b)
Fabricated Thermowells:
-
Fabricated-Screwed
-
Fabricated-Seam weld/Seamless Sleeve,
|
Out of...
Titanium,
Ti-
Pd, Tantalum, Nicrofer, Niobium, Zirconium,
Nickel
Hastelloy B&C
(c)
Seamless safety pocket:
-
Seamless tantalum, titanium, niobium, nickel, zirconium,
Hastelloy tubes.
-
Seamless ceramic tube wells.
(d)
To prevent Crevice corrosion - oxide
layer coating on Sleeves with plug
or cap nut and chain with well. |
|
