| CP ANODES (CATHODIC PROTECTION)
|
Ti Anode Fabricators Pvt. Ltd, Chennai, India has proven technology for making MMO anodes or mixed metal oxide iccp anodes and reference electrodes for a full range of cathodic protection application, by using Impressed Current Cathodic Protection (ICCP) process. If you would like to know which products could be used in your application, detailed information can be found for each of them by selecting the appropriate model(s) in each category. All of our products can be customized to fulfill your particular requirements. Please contact us if you need further assistance. For further details please visit our site www.cpanode.com
|
| Principle
|
The principle of cathodic protection is connecting an external anode to the metal to be protected and the passing of an electrical DC current so that all areas of the metal surface become cathodic and therefore do not corrode. The external anode is to be an impressed current cathodic protection anode, where the current is impressed from an external DC power source. DC current is sent through an insulated wire to the anodes [which are either Dimensionally stable anodes / dimensionally stable anodes - MMO coated titanium anodes, Platinised titanium anodes, Platinized niobium anodes or their copper cored with platinum plated surface] buried in the soil near the articles like underground storage tank, pipeline & etc. The current then flows on articles and returns to the rectifier through an insulated wire attached to the articles – Now the article is protected because the current passing on.
|
| Anodes
|
Platinized Titanium anodes take advantage of the low consumption rate and high current density. Voltages in excess of 10 Volts will result in severe pitting of the titanium core causing premature failure.
Platinized Niobium / Tantalum anodes also take advantage of the properties of platinum, but avoid the low driving voltage restriction of Platinized titanium anodes. Breakdown of the niobium oxide film occurs at approximately 120 Volts. Thus these anodes are used where high driving voltage is required. Platinized anodes are quite expensive but have an extremely long life. They are therefore an economical choice for critical applications. For further information please refer site www.ptanode.com
Mixed Metal Oxide anodes consist of a high purity titanium substrate with an applied coating consisting of a mixture of platinum group metal oxides. The titanium serves as a support for the oxide coating. The mixed metal oxide is a crystalline, electrically conductive coating that activates the titanium and enables it to function as an anode. When applied on titanium, the coating has an extremely low consumption rate, measured in terms of milligrams per year. As a result of this low consumption rate, the metal dimensions remain nearly constant during the design life of the anode - providing a consistently low resistance anode. For more details, please refer www.cpanode.com
|
| Anode Selection guide
|
| ICCP Anodes |
Process Vessels |
Reinforced concrete |
Water front Structures |
Pipe lines |
Condenser & Water boxes |
Well Casings |
Tanks |
| Water storage |
Under ground |
Above ground |
| Tubular Anodes |
x |
|
x |
|
|
x |
|
x |
|
| Tubular String anodes |
|
|
|
|
|
x |
|
|
|
| Embedded Civil Probe anodes |
|
x |
|
|
|
|
|
|
|
| Probe anodes |
x |
|
x |
|
x |
|
x |
|
|
| Rod anodes |
|
|
x |
|
x |
|
x |
|
|
| Wire anodes |
|
|
|
x |
|
|
x |
x |
x |
| Wire anodes (Copper cored) |
|
|
|
x |
|
|
x |
x |
x |
| Piggyback anodes |
|
|
|
x |
|
|
x |
x |
x |
| Cantilever anodes |
x |
|
x |
x |
x |
|
x |
|
|
| Canister anodes |
|
|
|
x |
|
|
|
x |
x |
| Ribbon anodes |
|
x |
|
|
|
|
|
x |
x |
| Strip anodes |
|
x |
x |
|
x |
|
|
|
|
| Mesh anodes |
|
x |
|
|
|
|
|
|
|
| Disc anodes |
|
|
x |
|
x |
|
|
|
|
| Ladder anodes |
|
x |
|
|
|
|
|
|
|
|
| Reference Electrode Selection Guide
|
| Reference Electrodes |
Process Vessels |
Reinforced concrete |
Water front Structures |
Pipe lines |
Condenser & Water boxes |
Well Casings |
Tanks |
| Water storage |
Under ground |
Above ground |
| Ag / AgCl |
x |
x |
x |
x |
x |
x |
x |
x |
x |
| Titanium |
x |
|
x |
x |
x |
x |
x |
x |
|
|
Go to www.cpanode.com
Go to Construction of material
|
|
|
