Titanium Equipment's

Engineering & Electrochemical Equipment's Manufacture

DIAPHRAGM

Ti Anode Fabricators Pvt Ltd has an internationally recognized reputation for the manufacture of the Tantalum Diaphragm. The purpose of a diaphragm seal is to isolate a pressure measuring instrument from the process media. It is often used for the most difficult measuring tasks, such as when the environment is extremely hot or cold, or when a process connection is difficult to attach to the measuring instrument.

The purpose of diaphragm seal is to isolate a pressure measuring instruments. The contact surface between the media and the diaphragm is relatively large, which ensures more accurate pressure measurements.

Our sincere team of professionals and employees are always making an extensive effort to make high range of qualitative products which can be completely satisfy the expectations of our reliable consumers. We are proficiency in ethical to the equipment demands in diverse industries including Power, Oil & Gas, and Chemical, Water & Waste Water Treatment, Food, Pharma and others.

OC-262

FABRICATION AND SUPPLY OF SEAMWELD SLEEVE

Ti Anode Fabricators Pvt Ltd has gained notoriety for the plan and assembling of Tantalum Seamweld Sleeve. We are one of the dependable producers, exporters, vendors, and providers of Wide scopes of Sleeves as per the client's drawing and determinations. We offer the Sleeves for thermowell or potentially Sensor Safety pocket out of Tantalum, Niobium, Zirconium, Titanium, Titanium Palladium amalgam (Titanium Gr.7), Molybdenum, Ceramic, PTFE or Teflon, Nickel and its compounds like Hastelloy B, B2, and C, Inconel, Monel, Nicrofer and so on.

 Thermowell is given to safeguard the essential sensor from mechanical harm and consumption. An incredibly durable plan might expand the existence of the sensor yet may prompt an unfortunate reaction. Essentially, a sensitive plan will have unfortunate life however will further develop the reaction time. In this way, a legitimate equilibrium should be struck. Thermowells planned by us fulfill the guidelines laid out by BSI, DIN, ASME, ISO 9001, and different specialists; produced in-house from discernible Exotic and Refractory Metals, Precious and non-ferrous metals, and Polymer components. They are all accuracy made to the best expectations of finish in our advanced exceptional machine shop.

 Quite possibly the most conservative method for safeguarding the thermowells from synthetically forceful liquids is to give a bar-stock flanged thermowell made from traditional tempered steel with free coating as a Tantalum sleeve on the whole wetted segment. This will give strength from tempered steel erosion obstruction from the covering.

 As of late we have provided the thermowell sleeve to the own of our significant client and the item photograph is connected underneath.

                            FABRICATION AND SUPPLY OF SEAMWELD SLEEVE

oc-18

MANUFACTURING & SUPPLY OF SEAMWELD SLEEVE

Ti Anode Fabricators Pvt Ltd has an internationally recognized reputation for the design and manufacture of Tantalum Seamweld Sleeve. We are one of the trustworthy manufacturers, exporters, dealers, and suppliers of Wide ranges of Sleeves according to the client’s drawing and specifications. We offer the Sleeves for thermowell and or Sensor Safety pocket out of Tantalum, Niobium, Zirconium, Titanium, Titanium Palladium alloy (Titanium Gr.7), Molybdenum, Ceramic, PTFE or Teflon, Nickel and its alloys like Hastelloy B, B2, & C, Inconel, Monel, Nicrofer etc.

Thermowell is provided to protect the basic sensor from mechanical damage and corrosion. An extremely sturdy design may increase the life of the sensor but may lead to a poor response. Similarly, a delicate design will have poor life but will improve the response time. Therefore, a proper balance needs to be struck. Thermowells designed by us meet the standards established by BSI, DIN, ASME, ISO 9001, and other authorities; manufactured in-house from traceable Exotic & Refractory Metals, Precious & non-ferrous metals, and Polymer elements. They are all precision made to the highest standards of finish in our modern well-equipped machine shop.

One of the most economical ways to protect the thermowells from chemically aggressive fluids is to provide a bar-stock flanged thermowell made out of conventional stainless steel with loose lining in the form of a Tantalum sleeve on the entire wetted portion. This will provide strength from stainless steel corrosion resistance from the lining.

Recently we have supplied the thermowell sleeve to the own of our valuable customer and the product photo is attached below.

MANUFACTURING & SUPPLY OF SEAMWELD SLEEVE

Thermowells are made from Titanium, Tantalum, Nickel, Zirconium, Hastelloy are our main focus.

Applications:

Chemical industry, process technology, equipment manufacturing

For high chemical demands

For low and medium process loads

Special features:

Good price/performance ratio

Wetted parts made of special material

To know more details Please feel free to visit our website: - www.tianode.com

Follow Us on Instagram twitter FacebookPinterest

TANTALUM BAYONET HEAT EXCHANGER:

Bayonet heaters or heat exchangers are designed to immerse directly in the process chemicals for the steam heating chemicals at the desired temperature level. They are furnished fully and are easy to install in the process lines. They have high corrosion resistance which makes them the most demanding product in high corrosion applications. Moreover, the high thermal conductivity offers efficient heat transfer and is designed for long life, reliability, and requires minimum maintenance.

The Tantalum Bayonet Heat Exchanger is installed horizontally like flanged nozzles and some vertically like stuffing boxes. Often such heaters are inserted inside the tank and made of the tube bundle, tube sheet, or bonnet. There are different reasons to use these heat exchangers like they can be removed for inspection and cleaning. They can even heat nearly all types of liquid and offer a long lifespan.

These heat exchangers are well inspected and tested under the guidance and supervision of experts as per the setup industry norms and regulations. So, buy Tantalum Bayonet Heat Exchanger from us as per your demand. These heat exchangers are mainly designed in such a way that they can easily fulfill all the demands and requirements of customers.

Tantalum Bayonet heaters are made from Titanium, Tantalum, Nickel, and Zirconium are our main focus. Recently we have supplied Bayonet heaters to one of our valuable customers and the product photo is attached below.

BAYONET HEAT EXCHANGER

Bayonet Heater is a device used for heating liquids in huge storage tanks with volume in large quantity. The Tantalum Bayonet heaters are mounted inside a pressure-tight Bayonet pipe which is a sealed pipe with an end cap. Immersion heaters are directly immersed in the fluid to heat like water, oil, viscous material, and solvents.

Advantages of Tantalum Bayonet Heaters:-

#    Long-term validity as compared to other materials

#    Cost saving if it is well maintained

#    Corrosion resistant

#    High heat transfer efficiency

#    Eliminates expensive downtime due to equipment failure

#    Good heat conductor with Welding properties

To know more details Please feel free to visit our website: - www.tianode.com

Follow Us on Instagram twitter FacebookPinterest

SUPPLY OF EXOTIC METAL SEAMWELD SLEEVE

Ti Anode Fabricators Pvt Ltd has an internationally recognized reputation for the design and manufacture of SEAMWELD SLEEVES. We are one of the trustworthy manufacturers, exporters, dealers, and suppliers of Wide ranges of SleeveTi Anode Fabricators Pvt Ltd offer the Sleeves for thermowell and or Sensor Safety pocket out of Tantalum, Niobium, Zirconium, Titanium, Titanium Palladium alloy (Titanium Gr.7), Molybdenum, Ceramic, PTFE or Teflon, Nickel and its alloys like Hastelloy B, B2, & C, Inconel, Monel, Nicrofer, etc.

 

Tiaano’s Thermowells and Sleeves are designed to meet standards, established by BSI, DIN, ASME, ISO 9001, and other authorities; manufactured in-house from traceable Exotic & Refractory Metals, Precious & non-ferrous metals, and Polymer elements. They are all precision made to the highest standards of finish in our modern well-equipped machine shop. The below attached photo is for your reference, which was supplied recently to one of our valuable clients. 

Components are made from Titanium, Tantalum, Nickel, Zirconium, Hastelloy are our main focus. These are utilized as a part of applications in both public and the private sector.

 

To know more details Please feel free to visit our website: - www.tianode.com

Follow Us on Instagram , twitter, Facebook, Pinterest

Supply of Tantalum Sheet

Ti Anode Fabricators Pvt Ltd has an internationally recognized reputation for the design and manufacture of the Tantalum Sheet. We are one of the trustworthy manufacturers, exporters, dealers, and suppliers of the Tantalum Sheet. Wide ranges of Plates are offered by Tiaano from highly corrosion-resistant special materials for the exotic metal Chemical Process industries, manufactured in-house from traceable metals, are precision made to the usual international standards. Given mentioned photographs shows TAF's efficiency and experience.

Recently we have supplied the Tantalum plate to our valuable customer and the product photo is attached below.

Plates are made from Titanium, Tantalum, Nickel, Zirconium, Hastelloy are our main focus.

To know more details Please feel free to visit our website: - www.tianode.com

EXOTIC METAL SEAMWELD SLEEVES

Ti Anode Fabricators Pvt Ltd has an internationally recognized reputation for the design and manufacture of Wide ranges of Sleeves. We are one of the trustworthy manufacturers, exporters, dealers, and suppliers of Wide ranges of Sleeves according to the client’s drawing and specifications. Ti Anode Fabricators Pvt Ltd offer the Sleeves for thermowell and or Sensor Safety pocket out of Tantalum, Niobium, Zirconium, Titanium, Titanium Palladium alloy (Titanium Gr.7), Molybdenum, Ceramic, PTFE or Teflon, Nickel and its alloys like Hastelloy B, B2, & C, Inconel, Monel, Nicrofer, etc.

Tiaano’s Thermowells and Sleeves are designed to meet standards, established by BSI, DIN, ASME, ISO 9001, and other authorities; manufactured in-house from traceable Exotic & Refractory Metals, Precious & non-ferrous metals, and Polymer elements. They are all precision made to the highest standards of finish in our modern well-equipped machine shop.

Recently we have supplied the thermowell sleeve to own of our valuable customer to Maharashtra and the product photo is attached below.

To know more details Please feel free to visit our website: - www.tianode.com

SUPPLY OF REPAIR AND MODIFICATION OF EXOTIC METAL IMPELLER USED TO BRINE WITH CHLORINE TRACES

Ti Anode Fabricators Pvt Ltd has an internationally recognized reputation for the design and manufacture of Exotic Metal Impeller. We are one of the trustworthy manufacturers, exporters, dealers, and suppliers of Exotic Metal Impeller according to the client’s drawing and specifications. These are utilized as a part of applications in both public and the private sector. Wide ranges of Impellers offered by Tiaano from highly corrosion-resistant special materials for the Research and development, manufactured in-house from traceable metals, are precision made to the usual international standards.

The below-attached photo is for your reference, which was supplied recently to one of our valuable clients.

Above Items are made from Titanium, Tantalum, Nickel, Zirconium, Hast alloy are our main focus.

To know more details Please feel free to visit our website: - www.tianode.com