Titanium Equipment's

Engineering & Electrochemical Equipment's Manufacture

TITANIUM GRADE.2 FASTENERS

Tiaano design and manufactures Fasteners by using Inert metals of Titanium, Tantalum, Nickel, Hastelloy, Niobium, Duplex SS etc. Titanium Grade 2 Fasteners are well versed in high corrosion resistance.

Tiaano is well versed in manufacturing the Fasteners in various metals:

·         Titanium

·         Tantalum

·         Zirconium

·         Niobium

·         Hastelloy®

·         Monel®

·         Inconel®

·         High Nickel Alloys

·         Duplex Stainless Steel

·         Super Duplex Stainless Steel

Tiaano manufactures Titanium Fasteners in accordance with all major international design standards.

·         ASME

·         TEMA

·         API

·         ASTM

·         AWS

Our sincere team of professionals and employees are always making an extensive effort to make high range of qualitative products which can be completely satisfy the expectations of our reliable consumers. You can avail this range of Clamps at a very reasonable price and with customer customization. We are proficiency in ethical to the equipment demands in diverse industries including Power, Oil & Gas, and Chemical, Water & Waste Water Treatment, Food, Pharma and others.

 

TITANIUM_GRADE_FASTENERS

ZIRCONIUM SLEEVES FOR THERMOWELLS

Anode Fabricators Pvt Ltd offer the Thermowell and Sleeve for Sensor protection pocket out of Tantalum, Niobium, Zirconium, Titanium, Titanium Palladium alloy (Titanium Gr.7), Molybdenum, Ceramic, PTFE or Teflon, Nickel and its alloys like Hastelloy B, B2, & C, Inconel, Monel, Nicrofer and so on.

Design Parameters of Thermowell:-

Tiaano’s Thermowells and Sleeves are designed to satisfy standards, set up with the aid of BSI, DIN, ASME, ISO 9001 and different authorities; manufactured in-house from traceable exotic & Refractory Metals, precious & non-ferrous metals and Polymer factors. They're all precision made to the best requirements of end in our modern-day nicely prepared system keep.

The function of the impeller sleeves is to protect the shaft from wear and coming in contact with the pumping fluid. Pump shafts are usually protected from erosion, corrosion, and wear at seal chambers, leakage joints, internal bearings, and in the waterways by renewable sleeves. Pump sleeves help direct water flow to properly cool motors. Submersible pump motors require water flow over them to dissipate heat.

Please feel free to contact us through our Email ID: equipmentsmktg@tiaano.com  /  rotarysupport@tiaano.com

Reference Link: https://twitter.com/equipments_ti

 

  

SEAL CASE

Ti Anode Fabricators Pvt Ltd has an internationally recognized reputation for the manufacture of the Zirconium Seal Case. It helps to avoid the gas leakage. Tiaano is well versed in manufacturing the equipment’s in the Zirconium metal.

 

Zirconium seal case helps to avoid leakage and high corrosion resistance. For particular chemical process Zirconium seal case is more suitable than other metals. Tiaano is well versed in manufacturing the Zirconium seal case. When sealing a centrifugal pump, the challenge is to allow a rotating shaft to enter the ‘wet’ area of the pump, without allowing large volumes of pressurized fluid to escape. Seals have a wide spectrum of applications; therefore, their usage is not limited to one type of equipment. These applications range from automobiles, ships, rockets and industrial pumps, compressors, to residential pools and dishwashers and many more. Seals come in various forms which include single springs pump seals, compressor seals, multi-spring seal designs, metal bellows seals, mixer and agitators seals, and single and double cartridge seals. 

 

We use mechanical seals to stop any visible leakage. A seal will leak vapour as the fluid film on the faces reaches the atmospheric side of the seal faces, but any visible leakage will be non-existent. Corrosion of plant equipment is also at a minimum if the product is contained within a pump. Overall a seal is the best way to go. They will provide prevent wasted product resulting in reduced costs.

 

Our sincere team of professionals and employees are always making an extensive effort to make high range of qualitative products which can be completely satisfy the expectations of our reliable consumers. We are proficiency in ethical to the equipment demands in diverse industries including Power, Oil & Gas, and Chemical, Water & Waste Water Treatment, Food, Pharma and others.

OC-310

MANUFACTURING & SUPPLY OF SEAL CASE

SEAL CASE are used to prevent the leakage of fluids in rotating equipment. A seal prevents lubricants, such as oil and grease, from entering the environment and (dirty) water from entering the installation. Wide ranges of Seal Case are offered by Tiaano is manufactured with durable and corrosion-resistant materials to perform in the harsh environments found in the chemical processing industry. Types of Seal Case, in general, there are two different types of seals:

  • Static seals, do not move in relation to each other
  • Dynamic seals, these move past each other

We produce Seal Case which are manufactured in-house from traceable metals, are in precision made to the usual international standards. Given mentioned photographs shows TAF's efficiency and experience.

Recently we have supplied Seal Case to one of our valuable customers and the product photo is attached below.

Seal Case is made from Titanium, Tantalum, Nickel, Zirconium, Hastelloy are our main focus. Ti Anode Fabricators Pvt Ltdare one of the trustworthy manufacturers, exporters, dealers, and suppliers of Seal Case.

Advantages:

  •  predictable lifetime
  • energy savings
  • safe workplace
  • easy to maintain

The most common seal types include the following:

  •  Balanced seals
  • Unbalanced seals
  • Pusher seals
  • Non-pusher seals
  • Conventional seals
  • Cartridge seals